ZW-A35 Double PE Coated Paper Bowl Machine
-
Description
Machine VideoTechnical Specification:
| Model | ZW-A35 Double PE Coated Paper Bowl Machine |
| Paper Bowl Size | 20 oz-50 oz (mold exchangeable) height up to 125 mm |
| Raw Material | 140-450 g/㎡One-side or two PE (polyethylene) film coated/laminated paper |
| Rated Productivity | 35-45 pieces/minute; |
| Power Source | 380V 50Hz or other required |
| Total Power | 6 KW |
| Total Weight | 2500KG |
| Package Size(L x W x H) | 2830 x1450 x1900mm; |
| Electric Control Box | 1050×570 x750mm; |
| Working Air Source | 0.6Mpa, Air Out-put:0.6 m3/minute |
| Available to make any special size paper bowl machine and mould | |
The parts we used VS normal one
1) The Gear Box we use is 140 type, Normal one is 125 type.
140 type is much bigger and stronger than 125 type.
2) We use two Gear Box (one is 140 type and another one 100 type), normally one gear box is used in the paper bowl machine.
However one gear box is not stable as two. We use two, so it will not easily move after it is used for a long time.
3) 
As showed above, we use two tension bars, while normally one is used.
Two make this part balanced, it will not swing after a long time.
Free Accessories List
| Number | Name and description | Quantity | Note |
| 1 | Electric heater punching bottom (Short) | 1pc |  |
| 2 | Copper Immersion Heater （Long） | 1 pc | |
| 3 | Spanner | 1pc |  |
| 4 | Big spring | 1 pc |  |
| 5 | small spring | 3pcs | |
| 6 | Bottom knurling heater | 1 pc |  |
| 7 | Pre-heater | 2 pc |  |
| 8 | bearing(5204) + Knurling wheel | 1 set | |
| 9 | inner hexagonal spanner | 1 set |  |
| 10 | outer hexagonal spanner | 1 set |  |
| 11 | bottom screw M16 | 6 pcs | |
| 12 | oil gun | 1 pc |  |
| 13 | Neon-electroscope | 1 pc |  |
| 14 | Screw driver | 1 pc |  |
| 15 | Hammer | 1 pc |  |
| 16 | Machine spanner | 1 pc |  |
| 17 | Makintosh |  |
|
| 18 | Box spanner 12-14 17-19 |  |
|
| 19 | Pincers | 1 pc |  |
| 20 | Rubber of silica gel （Red 3pcs , white 2pcs ） | 5 pcs |   |
| 21 | Hexagonal screw 6,8,10,12 — each 2pcs | 8 pcs |  |
| 22 | flat shim D12-D16、12 Nut | 10 pcs |  |
| 23 | operation manual | 1 pc |  |
| 24 | instruction of inverter | 1 pc |  |
Samples of the cups made:
 |
 |
| Noodle Box | Paper Bowl |
Need to change mould if you want to make both kinds of cups above.
